Bumpers

Westin HDX Bandit Bumper

Westin's HDX Bandit Bumper combines a heavy duty diamond plate steel bumper constructed of schedule 40 steel pipe with a stylish grille guard featuring 2" diameter outer wraparound wings and 2 3/4" wide upright rubber strips. Designed to protect headlights, grille, hood and front fenders from road hazards, debris and wildlife damage. Features a stylish metal honeycomb mesh screen, which allows maximum airflow to the intercooler or radiator area while accenting the front end styling with a clean and rugged look. Removable mesh screens allow for factory camera and adaptive cruise control options available on some late model Ford applications. HDX Bandit Bumper includes a built-in 2" receiver hitch and (2) heavy duty 9,500 lbs bow shackle mounts, capable of delivering multiple towing options. Compatible for factory fog lamps or LED post mount lights. In addition, some late model Ram and Chevrolet applications feature provisions for factory parking sensors. Bolt-on installation with hardware and mounting brackets included. Available in black powder coat finish.

FEATURES

• Protects vehicle from damage against wildlife and road debris
• Provides added safety to driver and vehicle
• Heavy duty diamond plate steel
• Constructed of schedule 40 steel pipe
• Honeycomb mesh protects grille
• Heavy duty 2 3/4" wide upright rubber strips
• 1 1/2" headlight protection tubes
• 2" tube full wraparound wings ties into bumper
• Metal mesh screen allows maximum air flow to intercooler or radiator area
• Removable mesh screen for adaptive cruise control (late model Ford only)
• Removable center mesh for factory camera option (late model Ford only)
• Has provisions for factory parking sensors (late model Chevrolet and Ram)
• Built-in 2" receiver hitch
• (2) heavy duty 9,500 lbs bow shackle mounts
• 15/16" diameter shackle mount hole
• Compatible for factory fog lamps or LED post mount lights
• Custom die-cast riveted logo badge
• Mounting provisions for license plate
• Hardware and mounting brackets included
• Bolt-on installation - no drilling required

Westin HDX Bandit Rear Bumper

“Stand out from the Competition” with the all new HDX Bandit Rear Bumper from Westin. Built to compliment the style, precision, and durability of the matching HDX Bandit Front Bumper, this all new “off-road style” rear bumper, is clearly a cut above. Unlike the competition, which features an overlapping two piece design and an ugly weld which can warp the metal and is prone to rust, the new HDX Bandit Rear Bumper features an extremely clean, one piece design. The stamped diamond plate step surface is constructed of 11 gauge plate steel and features a welded inner structure for maximum strength. A unique “corner step” design provides extra wide step area to allow easy access to bed and cargo area. HDX Bandit Rear Bumper includes hardware, mounting brackets, flush mount LED license plate lights and two standard LED back up lights. Fully compatible with blind spot monitors and parking sensors, and can also accommodate an OEM hitch. HDX Bandit Rear is designed for heavy duty performance and extended life that is backed by a 3 year warranty with a black powder coat finish. The new HDX Bandit Rear Bumper is truly in a class by itself.

features

• Constructed of 11 gauge steel for strength and style
• Heavy duty diamond plate steel
• Unique “corner step” design provides an extra wide access step area
• Welded inner structure for maximum strength
• Protects vehicle from damage against wildlife and road debris
• Provides added safety to driver and vehicle
• Compatible for blind spot monitors and parking sensors
• Accommodate for OEM hitch
• Custom die-cast riveted logo badge
• Hardware, mounting brackets and two LED back up lights included
• Flush mount LED license plate lights included
• Bolt-on installation - no drilling required

Westin Pro-Mod Front Bumper

Westin’s Pro-Mod Front Bumper combines enhanced vehicle protection, with great looks. Pro-Mod’s revolutionary lightweight modular design is uniquely engineered with outrigger reinforcement brackets to provide maximum front end protection without compromising on strength, integrity or durability. The “high and tight” bumper profile creates a greater approach angle, which significantly improves off-road driving capabilities. The lightweight design also requires smaller shipping packages which dramatically reduces shipping costs. Pro-Mod bumpers feature a textured black finish with an e-coated base coat, providing long lasting corrosion protection from the elements. Once you see the Pro-Mod Front Bumper, the choice becomes obvious.

features

• Lightweight modular design reduces shipping costs without sacrificing strength
• Increases ground clearance and angle of approach
• Constructed of 10 gauge steel for strength and style
• Mesh screen allows maximum air flow to intercooler or radiator area
• Has provisions for factory sensors - on some applications
• 10 gauge steel valance included - on some applications
• Valance features laser-cut Westin logo
• Bolt on skid plate available - sold separately
• Compatible for factory tow hooks - on some applications
• Outrigger brackets support the wings of the bumper for maximum strength
• Configured to accept most 30" or 40" LED light bars in the center position - sold separately
• Removable screen allows use of optional round or square Outlaw LED light kits - sold separately
• Hardware and mounting brackets included
• E-coated base coat provides long lasting corrosion protection
• Available in textured black finish

N-FAB M-RDS Prerunner Front Bumper

The N-FAB M-RDS Prerunner front bumper follows the line of the front of your truck to create an extremely clean and aggressive pre-runner look. The new Multi-Mount system allows you to mount various combinations of LED lights. This RDS Bumper is a two-part system with bumper aluminum lower skid plate*, available as a complete kit. Each bumper is made in the U.S., with a .095 wall steel tubing and includes a 5-year finish and lifetime craftsmanship warranty.

FEATURES

• Pre-Runner radius style for a clean, aggressive look

• 1-piece fully welded design using 1.75" .095 wall tubing

• Bolt onto factory bumper mounts for easy installation

• Brushed aluminum lower skid plate included

• Standard gloss black or textured black powder coating, using N-FAB's 3-stage powder coating process

RBS-H Rear Bumper

The RBS-H rear replacement bumper is designed to bolt directly to the factory bumper mounts for ease of installation. RBS bumpers are built using 1.75" .095 wall tubing that is treated inside and out for maximum protection. It features a 3/16" brushed aluminum skid plate* with a precision cut "N-FAB" logo. N-FAB bumpers are made to be sturdy, durable and provide protection in every adventure.

Aggressive pre-runner style rear bumper - direct bolt-on design to factory mounts.

FEATURES

• Allows retention of factory hitch

• Constructed of 1.75" .095 wall tubing for strength and durability

• Brushed aluminum skid plate included

• License plate mounting location

• Standard gloss black or textured black powder coating, using N-FAB's 3-stage powder coating process

N-FAB RSP Front Bumper

The N-FAB RSP Front Bumper is built for extreme off-road demands. The N-FAB RSP Front Bumper comes with a skid plate* for the ultimate in underbody protection. The N-FAB RSP Front Bumper offers the capability to mount conventional lights or LED light bars. Some models of the RSP Front Bumper come available in a "Winch Ready" model. The N-FAB RSP Front Bumper is a one piece design constructed from .120" wall tubing for strength and durability. The RSP Front Bumper comes in both gloss black finish and textured black powder coat finish.

Winch options available for certain makes and models - Includes Anti-theft hardware for LED bars.

FEATURES

• Mounts up to 2, 38" LED light bars or Multi-Mount configuration

• Pre-Runner style for an aggressive light weight design

• Lower brushed aluminum skid plate is included

• 1-piece fully welded design using 1.75" .095 wall tubing for durability

• Standard gloss black or textured black powder coating, using N-FAB's 3-stage powder coating process

N-FAB RB Prerunner Rear Bumper

N-FAB's RB bumpers are built using 1.75" .095 wall tubing that is treated inside and out for maximum corrosion protection and is finished with a durable high gloss black or textured black powder coating. All RB bumpers are built as one-piece assemblies, ensuring maximum durability through tough conditions.

FEATURES

• Replacement Rear Bumper

• Compatible with the factory hitch

• Bolts directly to factory bumper mount

• Constructed with .095 wall tubing

• Standard gloss black or textured black powder coating, using N-FAB's 3-stage powder coating process